Finance, FX & Pricing

Prefunding and Settlement Lag: Managing the Cash Gap Between Collecting and Paying Out

From the outside a transfer is simple: the customer pays, the recipient is paid. Inside the business those two events are days apart and funded from different pots. The recipient is paid from a balance you placed with a payout partner in advance; the customer's money clears into your account later, in another currency. The space between the two is the cash gap, and running it well is most of what treasury means for a small licensed operator.

This post is about that gap: where it comes from, how to size the prefunding that covers it corridor by corridor, how to run it day to day, and how to keep the balances reconciled. It does not cover forecasting demand from sender behaviour or choosing payout partners; those are covered in planning liquidity from your sender types and choosing and running payout partners.

What the cash gap is

Follow one transfer through six steps.

  1. Collect. The customer pays you by card, bank transfer or an instant payment method. You have an instruction and, usually, an authorisation. You do not yet have cleared money.
  2. Clear. The customer's money settles into your account. Depending on the payment method, that is the same day, the next business day or several days later.
  3. Convert. You buy the payout currency, or your partner converts at an agreed rate. Either way, a rate is fixed at one moment and settled at another.
  4. Prefund. Before your partner will pay anyone, it holds a balance you sent it. That balance is your working capital sitting in someone else's account.
  5. Pay out. The recipient is paid from the prefunded balance, often within minutes of the customer's instruction.
  6. Settle. The partner reports what it paid, your ledger books it, and you top the balance up from your own bank account.

Step 5 happens before step 2 completes. Every transfer you accept is paid out with your money first and repaid by the customer's money later. The time between the two is the settlement lag, and the money needed to bridge it is prefunding.

Where the lag comes from

Five things stretch the gap, and they stack.

Payment method clearing. An instant bank payment can clear within minutes, a standard bank transfer the same or the next business day, and a card payment later still, with chargeback exposure after that. Your customers' mix of methods sets the collection-side lag.

Partner prefund rules. Most partners want the balance in place before they pay, and some set minimum balances or hold a reserve. A top-up is itself a bank transfer, with its own clearing time and its own cut-off.

Cut-offs. A top-up sent after the partner's bank cut-off lands the next business day. A payout instruction sent after the partner's own cut-off may wait until the next session.

Weekends and public holidays in two countries. Customers send on Saturday and Sunday. Many partners pay out on those days. Top-ups do not move until banks open. Add a Monday holiday in the sending country, or a festival holiday in the receiving country, and a balance that comfortably covers two days has to cover four. The UK government publishes its bank holidays by nation, including the dates for the year ahead; the receiving country has its own calendar, and the two rarely line up.

FX conversion timing. Buying currency in advance means your money sits with the partner, converted, before it is needed. Converting at payout fixes the rate you quoted and the rate you are charged at different moments. Conversion is not the lag, but it decides which currency your buffer sits in and who carries the rate movement meanwhile. Setting and changing rates is covered in managing exchange rates before you go live.

The pattern is clear once you draw it on a calendar: the longest gap is almost never on a normal Tuesday. It is from a Friday afternoon cut-off to the first business day that both countries share.

Sizing prefunding per corridor

Work corridor by corridor; each has its own outflow, partner and calendar. The method has four inputs.

  1. Average daily outflow on that corridor over the last 60 to 90 days, in the payout currency, with weekend days included since payouts continue.
  2. Peak-day multiplier: the ratio of your busiest normal day (pay day, the day before a festival) to the average. The seasonal windows are covered in the sender-types post; here you only need the multiplier.
  3. Longest expected gap in days between a balance check and the next top-up landing, taking the partner's cut-off, its top-up clearing time and the worst normal combination of weekends and holidays in both countries.
  4. Buffer: one extra day, because the partner's statement and your ledger will not always agree to the hour.

Then:

  • Days of cover = longest expected gap + buffer
  • Prefund target = average daily outflow × peak-day multiplier × days of cover
  • Top-up trigger = the balance at which a top-up sent now, at the normal clearing time, lands before the balance reaches one day of cover

A worked example (illustrative figures). A UK operator sends to India. The partner pays out seven days a week and wants a balance in place before paying. Top-ups sent before 2 pm on a UK business day land with the partner the next business day.

InputIllustrative value
Average daily outflow (INR)4,000,000
Peak-day multiplier1.5
Longest expected gap4 days (Friday 2 pm cut-off, then a Monday bank holiday in the UK, landing Tuesday)
Buffer1 day
Days of cover5
Prefund target4,000,000 × 1.5 × 5 = INR 30,000,000
Top-up triggerWhen the balance falls below 3 days of cover (INR 18,000,000), send a top-up the same day before cut-off

On a plain week the balance never nears the trigger. On the long weekend it does, which is the point: the target is set by the worst normal gap, not the average day. A partner that tops up within an hour and pays out only on business days needs far fewer days of cover; a slow-clearing top-up and a festival calendar need more.

Running it daily

A written routine beats a good memory, and it fits into a short morning check.

  • Check every partner balance against its trigger, from the partner's statement and against the balance your ledger says you should have. A difference is a movement one side has booked and the other has not. Find it before you top up.
  • Send top-ups before cut-off, every time, and record the reference against the partner so the incoming credit can be matched when the partner confirms it.
  • Look at the calendar for the next five days, both countries, and bring top-ups forward when a holiday or a known peak is coming.
  • Check what is in flight: payouts sent to the partner and not yet confirmed reduce the usable balance even though the statement may still show them as available.

When a balance runs short, the rule is hold or queue, never fail. A transfer that cannot be paid because your balance is low has nothing wrong with it; the customer has paid and the recipient's details are good. Queue it, tell the customer it is scheduled rather than complete, and release the queue as the top-up lands. Failing it creates a refund, a reversal and a re-send, and teaches the customer that you are unreliable on the day they needed you. How to tell the difference between a payout that is stuck on your side and one the partner has refused is in catching failed or stuck payouts before customers call.

Month-end and the audit view

Prefunded balances are assets: your money held by a partner. Give each partner balance its own ledger account and reconcile it on three sides every day:

  • the partner's statement, which shows top-ups received and payouts made;
  • your ledger, which should show the same movements booked as they happened, with fees and FX in their own accounts rather than netted into the balance;
  • your bank account, which shows the top-ups leaving.

If the three agree every morning, month-end is a confirmation. If they only meet at month-end, the differences have had thirty days to compound: an unbooked partner fee, a payout confirmed late, a top-up sent on the 31st and received on the 2nd. A ledger that posts reversals rather than edits keeps the trail readable when an auditor asks how a balance moved; see double-entry accounting for remittance and the daily routine in payment reconciliation for money transfer operators.

One distinction matters for UK operators. Prefunding you place from your own funds is working capital, not customer money. Customer money you hold on a customer's behalf may be relevant funds that have to be safeguarded, and if you top up partners from customer receipts, ask your adviser how the safeguarding rules treat that money. The FCA's revised safeguarding rules, in force since 7 May 2026, require a safeguarding reconciliation at least once each reconciliation day, a job in its own right. Keep the two pots, and the two reconciliations, apart.

Check with your compliance adviser.

Frequently asked questions

How many days of prefunding should a corridor have?

Enough to cover the longest normal gap between a balance check and the next top-up landing, plus a day of buffer. For a partner that pays out seven days a week and takes a business day to receive a top-up, that is usually three to five days, more where a festival calendar stretches the gap. Work it out per corridor from your own outflow.

Should prefunding be held in the payout currency or my home currency?

Holding the payout currency removes rate movement between funding and payout but ties up money in that currency. Holding your home currency and converting at payout keeps cash flexible but leaves the rate open until the money is paid. Many operators hold the payout currency for their largest corridors and convert at payout for the long tail. Set the policy per corridor and write it down.

What should happen when a partner balance runs out mid-day?

Queue the affected transfers rather than failing them, send the customer an honest status that says the transfer is scheduled, and send a top-up at once. Release the queue in order as the balance is restored. A failed payout costs a refund, a reversal and a resend; a queued one costs a few hours and an accurate message.

How often should partner balances be reconciled?

Every business day, before the first top-up is sent, and on the first business day after a weekend for the days in between. The partner's statement, your ledger and your bank account should agree; a difference found the same day is usually one unbooked movement, while a difference found at month-end is a search.

Is prefunding the same as safeguarding?

Not usually. Prefunding placed from your own funds is working capital held with partners to pay recipients. Safeguarding is the protection of money you hold that belongs to customers, which in the UK sits under the FCA's safeguarding rules. They are reconciled separately and should never be confused in the ledger. Check with your compliance adviser.

Built by people who have helped MSBs for years.

47 ready-made risk indicators, drawn from what they see every day, combined into your own rules.

  • 47 ready-made risk indicators
  • Your own rules
  • 8 sanctions lists
  • A person decides
Book a demo

See RemitSo running with your corridors.

  • 30 minutes with our team, on video
  • The real admin panel and customer apps
  • The right way to buy it for you, explained with pricing
  • Your compliance and launch questions answered

We use these details to arrange your demo and reply to you. See our Privacy policy.

Loading the form…

Video